Another Jan Ray clone !

Here is a pedal I made, a Vemuram Jan Ray clone!

This time, contrary to my previous Jan Ray clone, I decided to make it in a smaller 125B enclosure. It is not particulary a big deal with this pedal, you just have to be precise, and use a guide. I generally use a plastic card or a piece of cardboard with 4 holes disposed as the holes for the potentiometers on the enclosure, and put the potentiometers inside. Then, I cut and solder an excessive length of wire to the veroboard. I use a wire that you can bend so it can maintain the veroboard. Then, I place the veroboard above the potentiometers, and start to cut the wires at the minimal length, and solder it to the pots.

I used a prepainted enclosure from Banzai music (Vintage Orange sparkle), and classic small MXR style 17mm knobs. I also added a switch similar to the one on the Timmy that allows you to choose between a compressed (2 diodes) and an uncompressed (4 diodes) setting.

 As usual, I use the laser engraved logo:

I had many problem with the enclosure this time, Banzai music apparently have trouble with suppliers, and after 2 months I did not have the enclosure... I finally contact them and change the color of the enclosure. They were really helpful.

If you want more informations about the Jan Ray circuit, read my article here.